Contact Us

Tel:86-577-65518000

Fax:86-577-65518333

Mob:86-13566176226

E-mail: jacyplastic@hotmail.com

Add:No.550 Kaifa Fifth Road, Ruian Industrial Zoon, Ruian, Wenzhou, China

Home > News > Content
Plastic Crusher Machine According To The Classification Of Different Broken Materials Aug 11, 2017

Plastic Crusher Machine according to the classification of different broken materials
Today, the Plastic Crusher Machine on the market can be roughly the following three categories:
(A) hard Plastic Crusher Machine, the machine suitable for crushing all kinds of small and medium plastic sheet:
1.ABS, PE, PP board and other plate crushing recovery.
2, for the board material crushing and the design of the rectangular design of the mouth, easy to strip into the slab, improve work efficiency. Optional suction fan, storage tank composition of the plate crushing recovery system can be more fully play the recovery efficiency.
3, the use of sealed bearings, the bearing rotation for a long time to maintain good; knife design is reasonable, the product into a uniform; knife seat heat shrink treatment, shape design nice.
(B) strong plastic grinder:
1, chip-type knife structure between the claw knife, flat knife between, suitable for breaking ordinary sheet, pipe, profiles, sheet metal and packaging materials and other plastic products.
2, general-purpose plastic grinder, the use of sealed bearings, the bearing rotation for a long time to maintain a good; knife design is reasonable, the use of alloy steel blade, the product into a uniform; knife seat heat shrink treatment, and undergo a rigorous balance test, Nice and generous.
(C) plastic pipe Plastic Crusher Machine:
1, suitable for crushing all kinds of small and medium-sized plastic pipe, such as PE, PVC pipe, silicon tube and other pipe crushing recovery.
2, for the tube material crushing and unique design of the tube-type feed port, easy to strip into the pulverized, improve work efficiency. Optional suction fan, storage bucket composition of the pipe crushing and recovery system can be more fully play the recovery efficiency.
3, the use of sealed bearings, the bearing rotation for a long time to maintain good; knife design is reasonable, the product into a uniform; knife seat heat shrink treatment, shape design nice.
1, Plastic Crusher Machine and power unit in the installation must pay attention to ensure a solid. If the Plastic Crusher Machine is to be operated for a long time in a fixed position, it shall be fixed on the basis of the cement. If the operation is carried out, the crusher shall be installed on the base made of angle iron and shall ensure that the power machine (diesel engine or motor) And the pulley of the Plastic Crusher Machine is in the same plane of rotation.
2, Plastic Crusher Machine before starting, first hand rotation of the rotor, check the claws, hammer and rotor operation is flexible and reliable, broken room with or without collision phenomenon, the direction of rotation of the rotor and the arrow is the same direction, Plastic Crusher Machine lubrication is good.
3, the unit after the installation of the fasteners to check the fastening of the situation, the purpose is to ensure that the operation due to vibration caused by security risks! If loosened to be given to tighten. Also check the belt tightness is appropriate.
4, do not casually replace the pulley, to prevent the speed is too high to cause the explosion chamber explosion, or the speed is too low impact on the efficiency of the mill.
5, the plastic shredder should be kept after the first run idle for two to three minutes, no observation in the case of no longer expected to carry out the work of smashing.
6, Plastic Crusher Machine work at any time to pay attention to the operation of Plastic Crusher Machine, feeding to ensure uniform, to prevent blocking the waste room; should be intermittent, do not work for a long time overload. If you find a vibration, noise, bearing and body temperature is too high, such as spraying out of the phenomenon, should immediately stop checking, troubleshooting can continue to work.
7, do not leave the staff in the case, let the Plastic Crusher Machine free work. To ensure safety, we must pay more attention.